360截图20240605105611974.jpg

哪位大师有LP6288引脚功能资料分享一下，大恩不言谢！

本帖最后由 joyb 于 2024-6-5 10:57 编辑

General Description

The LP6288 is a multi-channel Converter provides six regulated voltage, it includes a boost and three bucks regulators, VGH and VGL charge pump for TFT LCDs. All output are programmable by IIC. VAVDD boost and VHAVDD buck for the Source Driver and the Gamma Buffer, VIO buck and VCORE buck for T-CON, VGH and VGL dual charge pump for the Gate Driver or the Level Shifter. VGH rail can be temperature compensated with GIP technology. Otherwise, High Voltage Stress Mode(HVS) for VAVDD and VHAVDD and the integrated VAVDD Isolation Switch is implemented. VCORE, VHAVDD, VGH, VGL, GPM and the VGH temperature compensation can be enabled and disabled by IIC programming. Other features include short circuit protection, thermal shutdown protection and under-voltage lockout (UVLO). The LP6288 is available in a space saving QFN-40 (0.5mm pitch) package.


Applications


 TFT LCD TV
 TFT LCD Monitor
 TFT LCD Panel

Features


 Wide VIN Range: 8V to 14V
 Current-Mode Boost Regulator
Isolation Switch
13.5 to 19.8 Programmable Output Voltage
Current Limit Protection
Optional External Switching NMOS Control
 Buck Regulator for VIO
2.2V to 3.7V Programmable Output
3A Current Limit Protection
 Buck Regulator for VCore
0.8V to 3.3V Programmable Output
2.5A Current Limit Protection
 Buck Regulator for VHAVDD
4.8V to 11.1V Programmable Output
1.7A Current Limit Protection
 Positive Charge Pump for VGH
20V to 40V Programmable Output
0V to 15V Gate Shaping Voltage
Temperature Compensation
 Negative Charge Pump for VGL
-5.5V to -14.5V Output Voltage
 Reset Function for XAO
 Under-Voltage Protection
 Over-Temperature Protection
 IIC Compatible Interface for Register Control
 Available in QFN-40 (6×6mm)
 RoHS Compliant and Halogen Free
 Pb-Free Package

总体描述

LP6288是一款多通道转换器，可提供六种调节电压，它包括一个升压和三个降压调节器、用于TFT LCDs的VGH和VGL电荷泵。所有输出均可由IIC编程。VAVDD升压和VHAVDD降压用于源极驱动器和伽马缓冲器，VIO降压和VCORE降压用于T-CON，VGH和VGL双电荷泵用于栅极驱动器或电平转换器。VGH轨道可以用GIP技术进行温度补偿。否则，VAVDD和VHAVDD以及集成式VAVDD隔离开关将采用高压应力模式（HVS）。IIC编程可以使能和禁用VCORE、VHAVDD、VGH、VGL、GPM和VGH温度补偿。其他功能包括短路保护、热关断保护和欠压锁定（UVLO）。LP6288采用节省空间的QFN-40（0.5毫米间距）封装。


应用程序


 TFT液晶电视
 TFT液晶显示器
 TFT液晶面板

特征


宽VIN范围:8V至14V
电流模式升压调节器
隔离开关
13.5至19.8可编程输出电压
限流保护
可选外部开关NMOS控制
用于VIO的降压调节器
2.2V至3.7V可编程输出
3A限流保护
用于VCore的降压调节器
0.8V至3.3V可编程输出
2.5A限流保护
用于VHAVDD的降压调节器
4.8V至11.1V可编程输出
1.7A限流保护
用于VGH的正电荷泵
20V至40V可编程输出
0V至15V栅极整形电压
温度补偿
用于VGL的负电荷泵
输出电压为-5.5V至-14.5V
XAO的复位功能
欠压保护
过温保护
用于寄存器控制的 IIC兼容接口
采用QFN-40封装（6×6毫米）
符合 RoHS标准且不含卤素
无铅包装